Brilluxa Motor Driver CNC Controller Spindle Motor Control DC Motor Driver WS55 180 20V 50V Brushless Spindle Motor Driver Electric Tools Motor Driver

Features:The controller can drive the DLDC motor with HALL or without HALL.The driver is based on advanced technology and be provided with high speed, high TORQUES, low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output, positive negative rotation control etc.This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc.With overvoltage protection, over-current protection, locked-rotor protection.Specifications: Rated voltage:20 to 50 VDCRated current: 10ACurrent limiting:15A Maximum speed: 20000RPM( the specific speed depends on the motor itself and load) Storage temperature: -20℃~+65℃Usage environment: Avoid direct contacts with dust, fumes and corrosive gasesTemperature: 0-45℃Humidity: <80%, no frost, frost freesShock: 5.9m/S2 MAXStorage humidity: 0~95%RHSize: 9.5 * 7 * 3.5cm / 3.74 * 2.76 * 1.38inchWeight: 260g Detail:1.Two modes of speed regulation:External potentiometer: through this potentiometer speed regulation;Note: The two speed regulation can not be used simultaneously 2. Speed output PG signal: There is a 5v-revolution pulse output between the port and the ground.The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60.3. Alarm output ALM signal:There is an 5V alarm pulse output between the port and the ground.4. Positive inversion function: F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally.5. Start-stop (two

• WS55-180 is a high performance,cost-effective 3 phase BLDC motor controller.Voltage range is from 20VDC to 50VDC
• External potentiometer control/external voltage control
• With overvoltage protection, over-current protection, locked-rotor protection
• The controller can drive the DLDC motor with HALL or without HALL.
• This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc